IBM USB Serial/Parallel Adapter
HardwareID: 0x067B:0x2303
USB/VID_067B&PID_2303&REV_202
USB/VID_067B&PID_2303
IBM/Lenovo Option#: 22P5298
IBM/Lenovo P/N#: 22P9035
IBM/Lenovo FRU$: 22P9036
Archived WebSite:
https://web.archive.org/web/20091024080319/http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-41778
USB Serial/Parallel adapter driver for Windows 98, Me, 2000, XP - ThinkPad General
Applicable countries and regions
This file provides the driver for installing the USB Serial Parallel Adapter, part number 22P5298, as a serial port and parallel port in Microsoft Windows 98, Me, 2000, XP.
This driver supports all ThinkPad models with an available USB port.
File details
Version: 4.0.1
Release Date: 2005/08/04
File link File size File description
usbpssetup.exe 1,884,080 USB Serial Parallel adapter driver (Install)
uninstall.exe 36,864 USB Serial Parallel adapter driver (Uninstall)
Additional information
This Additional information field contains the following sections
I. Installation instructions
II. Setting up a Serial device
III. Setting up a Printer device
IV. Uninstallation instructions
I. Installation instructions
Note: Perform the following steps after downloading and extracting the driver above.
Power on the system and make sure the USB port is enabled and working properly.
Download USBPSSetup.exe to a temporary directory on your system and run the file by double-clicking it.
Plug the USB cable of the USB Serial Parallel Adapter into the USB port and Windows will detect it.
If the warning message software has not passed windows logo testing appears, select Continue anyway.
II. Setting up a serial device
To connect the serial device, perform the following steps:
Plug the serial device into the serial port of the USB Serial Parallel adapter.
Plug the USB cable of the USB Serial Parallel adapter into the USB port on your system.
Configure your serial port by going to the properties of your serial device and ensure that the port is set to USB Serial Port. Each serial device is setup differently.
III. Setting up a printer device
To connect the printer device, perform the following steps:
Power off the printer and plug the printer device into the printer port of the USB Serial Parallel adapter.
Power on your printer.
Power on your system and plug the USB cable of the USB Serial Parallel adapter into the USB port on your system.
If you have previously installed a printer device, click Start, then click Printers and Faxes. If the printer is not installed, go to Step 7.
Right-click the default printer and then click Properties.
In the properties window click the Details tab; then change the printer port to USB to Parallel Port.
If you do not have a printer installed, click Start, then click Printers and Faxes, and click Add a Printer to open the Add Printer Wizard window.
Click the Next button to continue to the Local or Network Printer selection.
Deselect Local printer attached to this computer to have Windows XP Automatically detect and install my plug and play printer.
Click the Next button to continue.
When prompted for the port that the printer will use, choose USB001 (virtual printer port for USB).
Click the Next button to continue.
From the Add Printer Software window, choose your printer manufacturer and model from the list.
Click the Next button to and following the remaining prompts to install your printer driver.
Run Print Test Page to test printer connection.
IV. Uninstallation instructions for the USB Serial Parallel adapter driver
Before running the Uninstall.exe program, it is advised to shut down and save any applications or files being used as the system must restart to complete uninstallation. You may uninstall the USB Serial Parallel adapter device driver by double-clicking the Uninstall.exe file. You will be prompted to click OK to reboot your system.
Applicable countries and regions
Worldwide
Back to top
Document id: MIGR-41778
Last modified: 2005-08-05
Copyright © 2009 IBM Corporation
Copyright © Lenovo 2009, all rights reserved
HardwareID: 0x067B:0x2303
USB/VID_067B&PID_2303&REV_202
USB/VID_067B&PID_2303
IBM/Lenovo Option#: 22P5298
IBM/Lenovo P/N#: 22P9035
IBM/Lenovo FRU$: 22P9036
Archived WebSite:
https://web.archive.org/web/20091024080319/http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-41778
USB Serial/Parallel adapter driver for Windows 98, Me, 2000, XP - ThinkPad General
Applicable countries and regions
This file provides the driver for installing the USB Serial Parallel Adapter, part number 22P5298, as a serial port and parallel port in Microsoft Windows 98, Me, 2000, XP.
This driver supports all ThinkPad models with an available USB port.
File details
Version: 4.0.1
Release Date: 2005/08/04
File link File size File description
usbpssetup.exe 1,884,080 USB Serial Parallel adapter driver (Install)
uninstall.exe 36,864 USB Serial Parallel adapter driver (Uninstall)
Additional information
This Additional information field contains the following sections
I. Installation instructions
II. Setting up a Serial device
III. Setting up a Printer device
IV. Uninstallation instructions
I. Installation instructions
Note: Perform the following steps after downloading and extracting the driver above.
Power on the system and make sure the USB port is enabled and working properly.
Download USBPSSetup.exe to a temporary directory on your system and run the file by double-clicking it.
Plug the USB cable of the USB Serial Parallel Adapter into the USB port and Windows will detect it.
If the warning message software has not passed windows logo testing appears, select Continue anyway.
II. Setting up a serial device
To connect the serial device, perform the following steps:
Plug the serial device into the serial port of the USB Serial Parallel adapter.
Plug the USB cable of the USB Serial Parallel adapter into the USB port on your system.
Configure your serial port by going to the properties of your serial device and ensure that the port is set to USB Serial Port. Each serial device is setup differently.
III. Setting up a printer device
To connect the printer device, perform the following steps:
Power off the printer and plug the printer device into the printer port of the USB Serial Parallel adapter.
Power on your printer.
Power on your system and plug the USB cable of the USB Serial Parallel adapter into the USB port on your system.
If you have previously installed a printer device, click Start, then click Printers and Faxes. If the printer is not installed, go to Step 7.
Right-click the default printer and then click Properties.
In the properties window click the Details tab; then change the printer port to USB to Parallel Port.
If you do not have a printer installed, click Start, then click Printers and Faxes, and click Add a Printer to open the Add Printer Wizard window.
Click the Next button to continue to the Local or Network Printer selection.
Deselect Local printer attached to this computer to have Windows XP Automatically detect and install my plug and play printer.
Click the Next button to continue.
When prompted for the port that the printer will use, choose USB001 (virtual printer port for USB).
Click the Next button to continue.
From the Add Printer Software window, choose your printer manufacturer and model from the list.
Click the Next button to and following the remaining prompts to install your printer driver.
Run Print Test Page to test printer connection.
IV. Uninstallation instructions for the USB Serial Parallel adapter driver
Before running the Uninstall.exe program, it is advised to shut down and save any applications or files being used as the system must restart to complete uninstallation. You may uninstall the USB Serial Parallel adapter device driver by double-clicking the Uninstall.exe file. You will be prompted to click OK to reboot your system.
Applicable countries and regions
Worldwide
Back to top
Document id: MIGR-41778
Last modified: 2005-08-05
Copyright © 2009 IBM Corporation
Copyright © Lenovo 2009, all rights reserved
- Laptops without serial ports - I have a new laptop an IBM R40. Like many new laptops these days it has no serial port. I have an IBM USB Serial Port Adapter part number 22P9035 and FRU number 22P9036. This is basically a device that connects to the USB on the laptop and the other end provides one serial port and one parallel port.
- Ibm usb serial parallel adapter driver 22p9035 This way, you have the any of the wallpapers in your wall -- which you shots, it sniffed out the that you deleted them. Resonant sounds very similar to. 12 may include unspecified updates, ibm usb serial parallel adapter driver 22p9035 camera and done.
- Your Satisfaction Is Guaranteed. The part/ product is in like-new condition.
- I have an IBM USB Serial Port Adapter part number 22P9035 and FRU number 22P9036. El driver para IBM USB Serial Parallel Adapter. Windows 7 pro and I. I have an IBM USB Serial Port Adapter part number 22P9035 and FRU number 22P9036. And the other end provides one serial port and one parallel port.
- Original IBM ThinkPad USB Serial Parallel Adapter 22P90 VCCI Class B / CISPR Class B Rating: 5V 500mA (0.5A) Selling price: $20 (Delivery or shipping always available) do NOT contact me with unsolicited services or offers.
Ibm Usb Serial Parallel Adapter
IBM USB Serial Parallel Adapter - parallel/serial adapter overview and full product specs on CNET.
OK, I've got Vista and there are times that I won't be able to use my 'real hardware' ultrabay adapter, so I'm looking for a combination serial/parallel adapter (or two single adapters, if I must) that can plug into the USB port, and work in Vista. Preferably one with a Vista logo certification.
